ALL WELDS CONTINUOUS UNLESS OTHERWISE STATED. 未注焊縫均為連續焊
ALL WELDS 3mm FILLET UNLESS OTHERWISE STATED 未注焊角高3mm.
ALL UNSPECIFIED RADI - R3 未注圓角R3
REMOVE ALL BURRS AND SHARP EDGES 所有尖角/棱角倒角并去毛
11 TOTAL COILS APROX.9 WORKING COILS APROX.RIGHT HAND WOUND ONLY,END COILS SQUARE TO TOUCH.總圈數約11圈；工作圈數約9圈；右旋；彈簧的端部磨平以便于接觸.(此為彈簧技術說明)
CHANNEL 槽鋼
RSA 708 角鋼 70X70X8
M30X1.5 pitch M30X1.5的錐螺紋
Tackweld 點焊
OD 1/4" outside dimension 1/4"的縮寫 外徑直1/4"
75 CRS 尺寸為75 材質為冷軋鋼板
410 OPENING REF 410 開口參考尺寸
40 REF 尺寸為40,參考值
2.5" BSP 2.5” 圓錐管螺紋
2.5" BSPT HEXAGON 2.5” 六角圓錐管螺紋(即對絲)
30x2.5 FLAT BAR 30X2.5 扁鋼
TYP 2 POSNS 2處
FEMALE: 內扣(母扣)
MALE: 外扣(公扣)
eccentric shaft 偏心軸
PIN 銷軸
COTTER PIN 開口銷
screw 螺桿
axletree 軸承
closing ring 擋圈
circlip 彈性擋圈
SPRING 彈簧
SET SCREW 緊定螺釘
ROUND NUT 圓螺母
FLAT KEY 平鍵
ROUND NUT 圓螺母
HEX HD BOLT 六角螺栓
non-buckle longth 無扣長
FLAT WASHER 平墊圈
FULL NYLOCK NUT 螺母
LIFTING EYE BOLT 吊環螺釘
SOCKET HEAD CAP SCREW 內六角螺釘
HEX HD SETSCREW 六角螺釘
distance sleeve of axletree 軸承隔套
DEEP GROOVE BALL BEARING 深溝球軸承
SLOTTED PAN HEAD SCREW 開槽盤頭螺釘
TAPERED ROLLER BEARING 圓錐滾子軸承
THRUST BALL BEARING 推力球軸承
SINGLE COIL SPRING WASHER 彈簧墊圈